Ikegami HTM-1005R Operation Manual page 33

153
WIDTH
<HDTV 4:3 Scan Size>
f. Adjustment procedure 4
(SDTV 4:3 NORMAL, 16:9 NORMAL scan)
1. Input signal
• Monoscope for SDTV is recommended.
2. HEIGHT, WIDTH adjustments
• First, select 4:3 using the ASPECT switch and then
NORMAL-SCAN using the U-SCAN switch.
• Display the 93% marker using the MARK switch.
• Adjust WIDTH and HEIGHT until the 93% marker is sized
to the values shown in Table f-1-1.
• When continuing adjustments of different scan sizes, be
sure to write the data obtained so far into memory
beforehand by pressing the MENU/ENT switch.
SDTV 4:3 16:9 NORMAL SCAN Size
ASPECT SCAN
4 : 3 NORMAL
16 : 9 NORMAL
Table f-1-1
164
WIDTH
<SDTV 4:3 NORMAL Size>
164
WIDTH
<SDTV 16:9 NORMAL Size>
HEIGHT
4:3 marker
HEIGHT WIDTH
123 mm 164 mm
92 mm 164 mm
HEIGHT
93% marker
HEIGHT
93% marker
g. Adjustment procedure 5
(SDTV 4:3 UNDER, 16:9 UNDER scan)
1. Input signal
• Monoscope for SDTV is recommended.
2. HEIGHT, WIDTH adjustments
• First, select 4:3 using the ASPECT switch and then
UNDER-SCAN using the U-SCAN switch.
• Display the 100% marker using the MARK switch.
• Adjust WIDTH and HEIGHT until the 100% marker is sized
to the values shown in Table g-1-1.
• When continuing adjustments of different scan sizes, be
sure to write the data obtained so far into memory
beforehand by pressing the MENU/ENT switch.
SDTV 4:3 16:9 UNDER SCAN Size
ASPECT
4 : 3
16 : 9
160
WIDTH
<SDTV 4:3 UNDER Size>
160
WIDTH
<SDTV 16:9 UNDER Size>
29
SCAN HEIGHT WIDTH
NORMAL 120 mm 160 mm
NORMAL 90 mm 160 mm
Table g-1-1
HEIGHT
100% marker
HEIGHT
100% marker