Table of Contents
Advertisement
3.3 Power supply
(1) AC input type
AC IN
(2) AC/DC input type
DC IN 12V
BREAKER 10A
AC IN 100-120V
Insert the supplied AC cable here to supply AC power.
To prevent the AC plug from falling off, lock the AC plug with this hardware after
insertion.
Breaker (for DC power supply overcurrent protection)
If the breaker has been actuated, eliminate the cause prior to pressing in this button.
When using DC power to operate monitors, supply 12 V here.
(Caution) <Nickel hydrogen battery>
1
4
2
3
For the use of nickel-hydrogen batteries, a parallel connection of two
1
GND
or more batteries is possible. Battery makers, however, say that their
2
N.C
warranty will not cover any products if they are used for monitors or
3
N.C
lighting equipment, since the lifetime of batteries is shortened in such
4
12V
use environments due to the heat generated by the batteries themselves.
It is therefore not recommendable to use nickel hydrogen batteries for
this machine.
To prevent the AC plug from falling off, lock the AC plug with this hardware after
insertion.
Insert the supplied AC cable here to supply AC power.
16
AC power input
AC plug retainer
DC power input
AC plug retainer
AC power input
Advertisement
Table of Contents
