Table of Contents
Advertisement
4.5 Menu functions
(1) Menu list
All the functions are executable on menu screens.
Page
MENU1 <FORMAT>
MENU2 <MODE>
MENU3 <CHANGE DATA>
MENU4 <STATUS>
MENU5 <LOCK>-<UNLOCK>
MENU6
<SET UP (ASP-80)>
MENU7 <AUDIO>
1
*
: For DKM-1051: MULTI SDI FM
For DKH-1051: HD SDI FM
2
*
: ----- (for no DE-1051), ON (for DE-1051)
Table 4-5-1 Menu List
Contents
1
1. MULTI-SDI FM*
AUTO
2. RGB/YPbPr FM
HDTV
3.
1035i/1080i
1080i/60
4.
RGB/YPbPr
YPbPr
5. INPUT DISP.
ON
1. CENT. MARKER
OFF
2. SYNC
INT
3. UTILITY MODE
INPUT
4. CHANGE ASPE.
AUTO
5. COMB
- - - - - *
6. REMOTE NO.
01
7. DEGAUSS TIME
0
1. SELECT FILE
REF
2. STORE FILE
ALL
3. CHANGE FILE
AUTO
4. LOAD FACTORY
ALL
1. STATUS
1. PASSWORD LOCK
UNLOCK
1. ZERO CALIBRATION
2. AWB (6500K)
3. AWB (9300K)
4. AWB (USER DATA)
5. MEASUREMENT &
MEMORY
6. REAL TIME
MEASUREMENT
1. LINE/SP CH
CH 1, 2
2. LED ENABLE
CH 1 to 8
3. LED DIMMER
HIGH
4. SP MONITOR
MIX
5. SP INPUT SEL
AUTO
Initial
value
Sets an HD-SDI input format (for earlier version DKH-1051 only).
Sets an RGB/YPbPr input format.
Sets 1035i/60 or 1080i/60 for the RGB/YPbPr input.
Sets RGB or YPbPr input.
At the time of channel switching, specifies whether to display
the set channel and the input signal format on CRT.
At the time of the safe marker output, specifies whether to
allow the cross marker to appear in the center of CRT.
Sets SYNC INT/EXT.
Specifies a function to be allotted to the UTILITY switch.
Selects the automatic aspect change mode by means of a
signal in a format and channel or the aspect fixed mode.
2
Turns ON/OFF for COMB filter.
Sets a serial remote ID number
Sets the degauss circuit actuation timing when the monitor is started.
Selects a white balance (REF, FILE1, FILE2, FILE3).
Transfers white balance data between files.
When a different white balance is set for each input channel,
specifies whether to memorize it.
Invokes the factory-made settings.
Displays each preset data value.
Protects preset data using a password.
Calibrates the ASP-80 black level.
Provides a 6500K setup using ASP-80.
Provides a 9300K setup using ASP-80.
Provides a setup for user-set x-y coordinates and brightness.
Puts user-set white balance data into the monitor as USER
DATA by reading the xy coordinates and brightness through
the use of ASP-80.
Measures color temperatures or brightness of the monitor in
real time using ASP-80.
Specifies a pair channel output of the embedded audio
outputs that is to be produced.
Specifies whether to display the audio level meter
(DAM-1054, DAM-1058).
Sets the brightness of the audio level meter (DAM-1054,
DAM-1058) in four steps.
Specifies how to produce the pair channel output that is set in
1 from a single speaker.
When DKM-1051AV/AVD is mounted, specifies whether to
embed the sound from the speaker built into the monitor or
whether to input it from the rear connector.
30
Description
Advertisement
Table of Contents
