Table of Contents
Advertisement
5. Installation and removal of options
5.1 Installation procedures,
installation examples and removal procedures for optional modules
1. Installation procedures and installation examples
• Be sure to turn off the power before installing any optional module.
The installation of any optional module with the power turned on may result in unexpected trouble or electric shock.
• The VIDEO PROCESS module is mounted as standard. It is therefore impossible to install any other module in that location.
• Optional modules must be inserted into the slots located beside the VIDEO PROCESS module.
• Up to two optional modules can be added to this machine.
• For the combinations of simultaneously mountable modules, refer to "List of Optional Module Combinations"
• DKM-1051AV or DKM-1051AVD can be installed in "Expansion slot 2 for option" only when DAM-1054 or DAM-1058 is mounted.
• DE-1051, DK-1051 or DKM-1051 can be installed in either the expansion slot 1 or 2 for option.
• When installing an optional module, remove the blank panel and insert the optional module.
The mounting screw located in the upper/lower part of an optional module must be fastened tightly to prevent imperfect contact.
2. Removal
• Be sure to turn off the power before removing any optional module.
Installation with the power turned on may cause unexpected trouble.
Standard
VIDEO PROCESS module
YPbPr / GBR
AUDIO
CH A
Optional module examples
mountable in either the
expansion slot 1 or 2
Y / G
Pb / B
Pr / R
SYNC
Expansion slot 1 for option
Expansion slot 2 for option
DC IN 12V
BREAKER 10A
37
The following modules can
be installed respectively in
the expansion slot 2 only
when DAM-1054 or
DAM-1058 is mounted.
Advertisement
Table of Contents
