Table of Contents
Advertisement
CAUTION
Fan alarm
If the built-in fan is interrupted, the POWER LED starts
blinking and the following message appears on screen. In
this case, immediately turn OFF the power and contact the
nearest Ikegami dealer.
WARNING:
FAN STOPPED !!
<POWER OFF PLEASE>
This message disappears 2 minutes later. The POWER
LED still blinks 8 times in 2 seconds and remains off for 1
second repeatedly and the high-tension section shuts down
itself. If no image is displayed on screen but the POWER
LED is blinking, therefore, immediately turn OFF the power.
Precautions Upon Use
To ensure safe use of this monitor, read this manual carefully, paying particular attention to
the following items.
1. Do not use any power supply other than the regulation AC power.
2. Do not subjecting the monitor to strong impact.
Otherwise, it will result not only in malfunction, but explosion of the CRT as well.
3. Avoid use and storage in the following places.
* Locations which do not meet the designated ambient temperature
installing the monitor near equipment generating heat or in cabinets with closed vents
causes the internal temperature of the monitor rise, which not only reduces the life of the
electrical parts but also causes malfunction.
* Locations with rain, snow, or excess humidity
Locationing the monitor in the above conditions will cause malfunction.
* Strong magnetic fields
4. Avoid exposing the CRT to sunlight
Subjecting the CRT to direct sunlight for a long period of time deteriorates the florescent
faces of the CRT. So avoid use outdoors.
5. Avoid exposing to high luminance fixed image for long periods of time
Take care as this will cause burn in of the CRT.
Also avoid displaying remote numbers in the remote entry state (remote numbers are displayed
when the wireless remote controller is used) for long periods of time. When not using the
wireless controller, set the remote number displayed on the screen to OFF.
Guarantee
Malfunctions occurring in normal use within one year from the date of purchase will be repaired
free of charge. This does not apply to the fuses.
If no image is displayed after user adjustment or if malfunction is suspected, contact your nearest
Ikegami dealer.
Accessories
This monitor is provided with the following accessories.
Check that none is missing.
1. Operation manual
2. AC cable
3. Remote connector
* Specifications and external dimensions are subject to change without prior notice.
CAUTION
Battery alarm (AC/DC input type)
• External battery
If the DC voltage to the monitor drops below DC 10.8V
on the battery power, the POWER LED starts blinking (on
and off repeatedly) to warn of a battery shortage. In this
case, immediately turn OFF the power and replace the
battery with a fully charged one.
• Memory backup battery in the monitor
As the memory backup battery becomes low in voltage,
"CHANGE BATTERY" appears on screen when the power
is turned ON. In this case, immediately turn OFF the power
and contact the nearest Ikegami dealer.
If the battery becomes dead, various adjustment data
may be erased. You will have to make these adjustments
every time the power is turned on.
Advertisement
Table of Contents
