Table of Contents
Advertisement
1. PAGE 1
<CHANGE PRESET>
*CONT*
CNT BRT CHR HUE APT
SELECT (
)
STORE (ENT)
CHANGE (
)
CLEAR (ESC)
a. CONTRAST
Adjust CONTRAST preset data.
For the adjustment procedures, refer to 4.4 (2).
b. BRIGHTNESS
• Adjust BRIGHTNESS preset data.
For the adjustment procedures, refer to 4.4 (1).
c. CHROMA
• Adjust CHROMA preset data.
• The setting of CHROMA data made when the analog YPbPr
signal input of SDTV is selected differs from that of other
CHROMA data.
For the adjustment procedures, refer to 4.4 (4).
d. HUE
• Refer to HUE preset data.
For the adjustment procedures, refer to 4.4 (4).
e. APT
• Adjust APERTURE.
CAUTION
The adjustment cannot be made unless the APT switch on
the panel is turned on (LED is lit) before adjustment.
2. PAGE 2
<CHANGE PRESET>
*R.BKG*
BKG
R-G-B
G-B
GAIN
SELECT (
)
STORE (ENT)
CHANGE (
)
CLEAR (ESC)
a. R.BACKGROUND
• Adjust the black balance (red component) in low light
portions.
For the adjustment procedures, refer to 4.4. (3).
b. G.BACKGROUND
• Adjust the black balance (green component) in low light
portions.
For the adjustment procedures, refer to 4.4. (3).
c. B.BACKGROUND
• Adjust the black balance (blue component) in low light
portions.
For the adjustment procedures, refer to 4.4. (3).
a. CONTRAST
b. BRIGHTNESS
c. CHROMA
d. HUE
e. APT
a. R.BACKGROUND
b. G.BACKGROUND
c. B.BACKGROUND
d. G.GAIN
e. B.GAIN
21
d. G.GAIN
• Adjust the white balance (green component) in high light
portions.
For the adjustment procedures, refer to 4.4. (3).
e. B.GAIN
• Adjust the white balance (blue component) in high light
portions.
For the adjustment procedures, refer to 4.4. (3).
3. PAGE 3
<CHANGE PRESET>
*H.PHASE*
PHA CENT SIZE
SELECT (
)
STORE (ENT)
CHANGE (
)
CLEAR (ESC)
a. H.PHASE
• Adjust the horizontal phase of a video image in each signal
input FORMAT.
• The setting is made individually even in the same FORMAT
at the time of HD4:3 SCAN only.
• Display the 100% MARKER and make adjustments in such
a way that a video image is placed in the 100% frame.
• For the adjustment procedures, refer to 4.4 (7).
b. H.CENT
• Adjust the horizontal position of the effective screen in each
signal input FORMAT.
• The setting is made individually even in the sameFORMAT
at the time of HD4:3 SCAN only.
• For the adjustment procedures, refer to 4.4 (7).
c. V.CENT
• Adjust the vertical position of the effective screen in each
signal input FORMAT.
• For the adjustment procedures, refer to 4.4 (7).
a. H.PHASE
b. H.CENT
c. V.CENT
d. WIDTH
e. HEIGHT
f. TRAPEZOID
g. SIDE PIN
Advertisement
Table of Contents
