Table of Contents
Advertisement
(2)-3 MULTI-SDI module (DKM-1051AVD) option
MULTI-SDI module (DKM-1051AVD) option
(3) SD-SDI module (DK-1051, DK1052N, DK-10512, DEK-1052N) option
Illustration of DK-1051
SD-SDI module (DK-1051, DK1052N, DK-10512, DEK-1052N) option
Illustration of
DK-1051
MULTI SDI input
• Input SDI signal here.
• Acceptable input format
1. 480i / 59.94
(4 : 2 : 2)
2. 576i / 50
(4 : 2 : 2)
3. 1035i / 59.94 (60)
4. 1080i / 59.94 (60)
MULTI SDI output
• Of the input SDI signals (A/B ch), the signal on a channel selected on the monitor side output here.
Embedded AES/EBU 8-ch output (0 dBFS)
• Eight channels (8-ch) of embedded audio signal superimposed on HD-SDI or SD-SDI signal output in the
AES/EBU format.
The output impedance is 75 Ω.
(Caution) For the mounting of this option, refer to "5. Installation and Removal of Options".
When DAM-1054 or DAM-1058 is mounted, this option can be installed in the "expansion slot
2 for option" only.
The SD-SDI modules are available in three types below and the display varies with modules.
• "SDI 4:2:2"
4:2:2 digital component module (DK-1051)
• "SDI 4FscN"
NTSC digital composite module (DK-1052N)
• "SDI 4:2:2 4FscN"
4:2:2 digital component & digital composite module (DK-10512N)
SD-SDI A/B input
• Input SD-SDI signal here according to the following modules, respectively.
• DK-1051
4:2:2 serial digital component signal
• DK-1052N
NTSC serial digital composite signal
• DK-10512
4:2:2 digital component, NTSC digital composite signal
(The formats are detected automatically.)
SD-SDI A-output
• The SD-SDI signal input to A-channel output here. (Active loop through)
SD-SDI B (monitor)-output
• The SD-SDI signal input to B-channel output.
• The signal selected on the monitor side can also output here by setting connectors in the module.
• <How to Set>
NORMAL(Factory-set)
EL101
EL102
5. 1080i / 50
(Option)
6. 1080i / 47.95 (48) (Option)
7. 720p / 59.94 (60)
(The 720p is compatible with HTM-1005R1 only.)
MONITOR OUT
EL101
EL102
12
Advertisement
Table of Contents
