Table of Contents
Advertisement
Y724 User Operating Manual
4. Select the checkbox (located at the left of the row), and then click ( OK ) to complete the
search and bind the camera to the selected channel.
5. Your camera (including valid IP address) is now included in the 'IPC Setup' and ready for
use. Ensure that the 'Enable' checkbox is selected, and click the ( Save ) button to finish
adding your new IP camera.
9.2 - SD Cards
It is recommended that the Y724 makes use of a Gatekeeper Systems SD card, in either a 32GB /
64GB / 128GB / 256GB size format. Gatekeeper Systems SD cards have been manufactured and
tested to perform at the widest range of temperature tolerances; exceeding the performance of
consumer grade SD cards.
To access the Y724's SD card, first unfasten the door clamps, and use the key to unlock and open
the security door. The SD card slot is concealed behind a panel which will slide open to reveal
the SD card (for more details please refer to the "Y724 Front View - Security Door Open" image
found on page 8).
IMPORTANT: The only time it is safe to remove an SD card is when the
BLUE LED indicator light IS NOT illuminated – indicating that the system
has been powered off (refer to the "LED Status Indicator" table found on page
8). Failure to power off the system before removing the SD card may result
in the loss of data.
9.2.1 - SD Card File Formatting
The Y724 uses a propriety SD card file format, and should not be reformatted using a Windows
operating system.
If you encounter a prompt to reformat the SD card in a Windows environment, click
§
CANCEL. Reformatting the SD Card using Windows will delete all recorded videoclips,
and will require that the SD card be re-formatted (as below) before use with the Y724.
In cases where a user wishes to format / re-format an SD card, navigate to:
Main Menu
è
§
From the 'Storage' screen, identify the SD card from the available 'Storage Type', and click
§
the 'Format' button (from the 'Format or Not' column). Clicking the 'Format' button will
reformat the SD card and delete all recorded video data.
Setup
è
Maintenance
è
Storage
135 of 149
Advertisement
Table of Contents
