Gatekeeper Y724 User's Operating Manual page 73

Hide thumbs Also See for Y724:
Table of Contents

Advertisement

Y724 User Operating Manual
Sleep
Ignition Delay
Timer From
Light off Time
Sleep Mode
Low Volt Protect
Ignition
Sets the additional time period that the
device will continue running after the
vehicle ignition is off. The device will only
stop recording and shutdown after this delay
period is past.
DEFAULT SETTINGS:
300
§
This means that when the vehicle is turned
off, the device will continue to record for
another 300 seconds (5 minutes) before
shutting down.
This consists of two-time fields to set the
start time and end time for which the device
will turn on and turn off respectively.
DEFAULT SETTINGS:
Disabled/not applicable.
DEFAULT SETTINGS:
Never
Drop list to select the sleep mode option for
the device:
No Consumption Standby
§
Low Power Standby
§
DEFAULT SETTINGS:
No Consumption Standby
§
This means that the device will not be
consuming battery power when it is shut
down.
Checkbox – selecting this option will enable
the device to monitor battery voltage. If the
battery voltage falls below the specified
threshold, the device will turn off to protect
the battery from being discharged.
DEFAULT SETTINGS:
Checkbox – Unselected
§
73 of 149

Advertisement

Table of Contents
loading

Table of Contents