Gatekeeper Y724 User's Operating Manual page 113

Y724 User Operating Manual
Manual Snap
you to select a particular camera
channel. The associated snapshot
settings for this channel will be
displayed for editing.
Snap Enable – if the checkbox is
§
selected, then this camera channel is
included when the DVR performs
the snap shots.
Resolution – this drop list enables
§
you to select the resolution for the
snapshots. Available options are
( WCIF, HD1, WHD1, D1, WD1,
720P, 1080P ).
Quality – this drop list enables you
§
to select the quality of the snapshot
on a scale of 1 to 8 (where 1 is best).
Upload Type – checkboxes which
§
allow you to select whether the
snapshots are to be uploaded to FTP
and/or 808.
Snap Numbers – numeric text field
§
to key in the number of snapshots
that will be taken.
Interval – numeric text field to key
§
in the interval (in seconds) between
snapshots.
Copy To – this feature allows you to
§
copy the current snapshot settings
for this channel to another channel,
thus allowing you to easily and
quickly replicate the snapshot
settings for the different camera
channels. Once you have selected
the channel to copy to, click on the
(Copy) button to make the copy.
DEFAULT SETTINGS:
Disabled/not applicable.
These settings are used for snapshots which
are taken manually by the user. Clicking the
(Setup) button displays the snap link settings
page which allows you to configure the
settings.
In the configuration screen, you will be able
to configure the snapshot settings for each
113 of 149