Table of Contents
Advertisement
Y724 User Operating Manual
Enable
Resolution
Encode Standard
Frame Rate
Quality
Channel 18 – set name as – CH18
§
Channel 19 – set name as – CH19
§
Channel 20 – set name as – CH20
§
Channel 21 – set name as – CH21
§
Channel 22 – set name as – CH22
§
Channel 23 – set name as – CH23
§
Channel 24 – set name as – CH24
§
Checkbox – if selected, enables this channel
for inclusion into the main stream
recording.
DEFAULT SETTINGS:
Enable only channels which have cameras
connected. Please note that the system will
show a videoloss message on channels which
are enabled, but do not have a connected
camera (i.e., no incoming video stream).
All IP cameras have the option for:
(1280x720)
720P
§
1080P (1920x1080)
§
DEFAULT SETTINGS:
1080P
§
Video recording Format:
•
H264
•
H265
DEFAULT SETTINGS:
•
H264
Drop list allowing you to select the frame
rate (in terms of frames per second) that you
would like to record at.
DEFAULT SETTINGS:
For all channels (1 to 24), set the following:
30 FPS
§
Drop list allowing you to select the encoding
quality (on a scale of 1 to 8 – where 1 is
best).
94 of 149
Advertisement
Table of Contents
