Gatekeeper Y724 User's Operating Manual page 119

Y724 User Operating Manual
Effective Time:
§
alarm in this time period as one alarm.
Save Settings:
§
Back to Previous:
§
saving.
Numeric field to key in effective time that will treat any additional
Click the (OK) button to save the alarm settings.
Click the (Cancel) button to return to the previous screen without
Linkage
Click the (Setup) button under Linkage to go
to the Linkage setup screen. This sets up the
video display, recording and snapshot
options associated with this alarm.
The Linkage setup screen enables you to
configure the following options:
Channel – checkboxes which allow
§
you to select any combination of the
camera channels to be included in
the display and recording.
Post Recording – drop list which
§
allows you to select the duration for
which video will continue to be
recorded when the alarm is
triggered.
Lock – checkbox, if selected will
§
mark the recorded video associated
with this alarm as locked video.
Linkage IO Output – checkboxes, if
§
enabled, the device will send a signal
to the selected IO output lines.
Output Delay Time – numeric field
§
to set the delay time for the IO
output (in seconds).
Linkage Screen – drop list to select
§
the options to display the video from
the selected cameras on-screen
when the alarm occurs.
None : Not displayed.
-
Single : Display 1 camera.
-
- Double : Displays 2cameras
Quad : Displays 4 cameras.
-
If Single (1x1), Double (1x2), or Quad (2x2)
display is selected, the (Setup) button allows
119 of 149