Table 5: Nitro-X™ Power And Run Led Definition; Table 6: Nitro-X™ Alarm Led Definition; Table 7: Nitro-X™ Sd Card Led Definition; Table 8: Nitro-X™ System Status Led Definition - Gatekeeper NiTRO 401 User Manual

POWER
Flashing Off
Table 5: NiTRO-X™ Power and Run LED Definition.
ALARM INDICATOR (3) ALARM INDICATOR (3) ALARM INDICATOR (3) ALARM INDICATOR (3) DEF DEF DEF DEFINITION INITION INITION INITION
On Alarm has been triggered. Note: Alarms are configured in
Alarm Menu (Please see manual for detailed information)
Off No Alarm detected.
Table 6: NiTRO-X™ Alarm LED Definition.
SD CARD PRESENT SD CARD PRESENT SD CARD PRESENT SD CARD PRESENT DEFINITION DEFINITION DEFINITION DEFINITION
INDICATOR (4) INDICATOR (4) INDICATOR (4) INDICATOR (4)
Flashing Indicates SD card is present and is being accessed, e.g.
writing of video file.
Off No SD Card present
Table 7: NiTRO-X™ SD Card LED Definition.
SYSTEM STATUS INDICATOR SYSTEM STATUS INDICATOR SYSTEM STATUS INDICATOR SYSTEM STATUS INDICATOR DEFINITION DEFINITION DEFINITION DEFINITION
(5) (5) (5) (5)
On Indicates that the system is active. Do Not Remove the SD
card while this LED is illuminated as doing so will cause
damage to the video file(s) on the SD Card. Press the STOP
button (6) once and wait until the System Status Indicator
LED turns off if the is a need to remove the SD card while
the System is active.
Off
The NiTRO™ or NiTRO-X™ is not in record mode and it is
safe to remove the SD Card.
Off with SD Card Present Unit is initializing after Ignition Signal applied.
Solid; Power Indicator Solid;
Run Indicator Flashing
Table 8: NiTRO-X™ System Status LED Definition.
Extend). Ignition is OFF and
NiTRO™ or NiTRO-X™ is
recording. The DVR will
power down when Power Off
Delay (Record Extend) is
reached.
NiTRO™ or NiTRO-X™ is OFF,
does not respond to ignition
signal. Do Not Do Not use the Do Not Do Not
Remote Control to turn the
NiTRO™ or NiTRO-X™ Off
- 26 -
MaxVIEW™ ™ ™ ™ 400 Operation.
MaxVIEW MaxVIEW MaxVIEW 400 Operation. 400 Operation. 400 Operation.
Opening a File. Opening a File.
Opening a File. Opening a File.
When viewing files directly from an SD Card
reader when the card reader is inserted into the
host computer a standard Windows dialog
window will appear, select Open To View Files
and click OK.
To view captured and saved video files within
MaxVIEW™ 400 open all of the files on the SD
Card double-click on my.gsx, Figure 23. This will
produce a list of available files which can be
viewed either by Calendar View Figure 33, or by
Video Clips Figure 35.
Using Calendar view a specific date and time can
be zoned in on and a reported incident quickly
appraised.
Open Recent Files. Open Recent Files. Open Recent Files. Open Recent Files.
MaxVIEW™ 400 has a feature which "remembers" recently opened and viewed files. This
makes the viewing of frequently accessed files an easier task to accomplish. MaxVIEW™ 400
will recall up to nine most recently opened files.
From the File menu choose Recent Files. A Pop-
Out side window will appear, move the cursor
over the files and they will highlight individually,
Figure 24. Once the required video file has been
located, single left click and this will open the file
in MaxVIEW™ for review.
Audio Audio Audio Audio
When video has been captured using a NiTRO-X™ 400 or NiTRO™ 400 series and all four
channels have been set to record audio, please note that audio will only be heard from the
camera currently in the Playback Window (Item 6 in Figure 25). Once a different view has
been selected from the thumb-nails the audio recorded from that camera will be heard.
Figure 23 : Open File.
Figure 24 : Open Recent File.
- 43 -