Gatekeeper Y724 User's Operating Manual page 99

Y724 User Operating Manual
OSD
Time
Vehicle Plate
Quality – drop list allowing you to
§
select the encoding quality (on a
scale of 1 to 8 – where 1 is best).
Copy To – this feature allows you to
§
copy the current channel's
substream recording settings directly
to another channel, thus allowing
you to easily and quickly replicate
the substream recording settings
across channels. Once you have
selected the channel to copy to, click
on the (Copy) button to make the
copy.
Copy – click this button to copy the
§
current settings to the selected
channel.
OK – click this button to save the
§
current settings for the channel.
Cancel – click this button to exit
§
back to the previous screen without
saving.
DEFAULT SETTINGS:
For all channels (1 to 24), set the following:
Enable – Checkbox – Selected
§
Audio – Always Audio
§
Resolution – CIF
§
Frame Rate – 15
§
Quality – 3
§
Checkbox – if selected, the date and time
will be displayed as an overlay text on top of
the recorded video.
DEFAULT SETTINGS:
Checkbox – Selected
§
Checkbox – if selected, the vehicle number
will be displayed as an overlay text on top of
the recorded video.
NOTE:
The Vehicle Plate data which the device
-
will overlay into the recorded video is
actually the identifier data which is set
in the Basic Setup à Regist Info à
99 of 149