Gatekeeper Y724 User's Operating Manual page 109

Y724 User Operating Manual
Location
Mileage
Flow Limit
Source
Location Data Source
Total
Base Mileage
Operation
Default, no limit
Drop list allowing the user to set the source
for the speed measurement:
Satellite
§
Pulse
§
OBD
§
NOTE:
If the measurement unit is set to Pulse,
-
you will also need to select the
calibration mode and perform a manual
calibration.
Pulse mode is currently unsupported,
-
and Gatekeeper Systems recommends
the use of Satellite for this setting.
OBD mode is currently unsupported,
-
and Gatekeeper Systems recommends
the use of Satellite for this setting.
DEFAULT SETTINGS:
Satellite
§
Drop list for setting the navigation mode:
GPS
§
NOTE:
Currently, this is the only available
-
setting.
DEFAULT SETTINGS:
GPS
§
Displays the total mileage which the vehicle
has travelled.
Sets the mileage of the vehicle on first day of
service on that route. This value can be
entered manually.
Correct: Allows the current mileage of the
vehicle to be entered.
Clear: Resets the mileage to 0.
Determines the limit for cellular data
control. No limit means that the data will
109 of 149