Table of Contents
Advertisement
Y724 User Operating Manual
1. Navigate to: 'Setup'
2. Enable a channel for your new IP Camera. Select an empty (unused) checkbox next to
the channel number (the example above uses channel number 5).
3. Click on the magnifying glass icon (in the same row) to search for the new camera.
-
The search will open the IPC search dialog, and prompt the system to enumerate
through all networked IP cameras to generate a new and valid IP address.
-
Once the camera is assigned a valid IP address, Port number, and Protocol type
(the MAC address is supplied by the camera vendor) it will be configured and
ready for use.
-
If the camera does not receive a valid IP address you can press the 'Refresh' button
to generate a new IP, or manually enter your own IP address.
è
'Surveillance'
è
'IPC Setup'
134 of 149
Advertisement
Table of Contents
