Powering Up; Logging On - Gatekeeper Y724 User's Operating Manual

Y724 User Operating Manual
3.1 – Powering Up
The Y724 is installed to make use of your vehicle's power supply, and the device will be powered
on when your vehicle is in operation. The device will automatically shut down after a 5-minute
interval after the vehicle is powered off (default setting).
The Gatekeeper Project Team are able to mount and install the device into the vehicle based on
your requirements and in accordance with industry best practices from years of experience. If you
prefer to mount the device yourself, please refer to section 10 "Y724 Installation Instructions"
(page 141) for detailed hardware installation instructions.
Once the device has powered up, please verify that you can see the display on your LCD monitor
or ICD2 with live video from connected cameras shown.
NOTE: If the front-side security door of the Y724 is left open for longer than 30
seconds, the device will power itself off.
3.2 – Logging On
Some of the tabs, and their associated system settings, require a login before they can be accessed
or modified. This is a security measure to ensure that system access is restricted to only
authorized users. The Y724 also keeps an operations log as an additional security and audit
measure.
A valid user account and associated login is required in order to access the following content on
the Y724:
Access from the Quick Menu:
Playback
§
15 of 149