Advanced - Gatekeeper Y724 User's Operating Manual

Y724 User Operating Manual

8.7.3 - Advanced

Navigate to: Main Menu
This subsection enables you to set up the trigger for alarm events based on G Sensor input, and
also to define the actions that will be taken when the alarm occurs.
G Sensor Alarm
Setup Alarm
è è
G Sensor
Alarm Type
Trigger
Linkage
Advanced
è
Checkbox – if selected, enables the device to
monitor for G Sensor trigger events. In case
of G Sensor exceeding the threshold values,
this alarm will be triggered.
DEFAULT SETTINGS:
Checkbox – Unselected
§
Drop list to select the classification level for
the alarm:
Event
§
Alarm
§
DEFAULT SETTINGS:
Alarm
Click the (Setup) button under Trigger to
display the Trigger setup screen to setup the
G threshold values:
X – numeric text field to set the
§
threshold value for the G forces
along the x-axis.
Y – numeric text field to set the
§
threshold value for the G forces
along the y-axis.
Z – numeric text field to set the
§
threshold value for the G forces
along the z-axis.
DEFAULT SETTINGS:
Disabled.
Click the (Setup) button under Linkage to go
to the Linkage setup screen. This sets up the
Advanced
127 of 149