Gatekeeper Y724 User's Operating Manual page 43

Y724 User Operating Manual
Main Stream
Channel Name
Enable
Resolution
Checkbox – Unselected
§
DEFAULT SETTINGS:
Channel 1 – set name as – CH1
§
Channel 2 – set name as – CH2
§
Channel 3 – set name as – CH3
§
Channel 4 – set name as – CH4
§
Channel 5 – set name as – CH5
§
Channel 6 – set name as – CH6
§
Channel 7 – set name as – CH7
§
Channel 8 – set name as – CH8
§
Channel 9 – set name as – CH9
§
Channel 10 – set name as – CH10
§
Channel 11 – set name as – CH11
§
Channel 12 – set name as – CH12
§
Channel 13 – set name as – CH13
§
Channel 14 – set name as – CH14
§
Channel 15 – set name as – CH15
§
Channel 16 – set name as – CH16
§
Channel 17 – set name as – CH17
§
Channel 18 – set name as – CH18
§
Channel 19 – set name as – CH19
§
Channel 20 – set name as – CH20
§
Channel 21 – set name as – CH21
§
Channel 22 – set name as – CH22
§
Channel 23 – set name as – CH23
§
Channel 24 – set name as – CH24
§
The device comes pre-configured with
standard names for the camera channels.
You may change these names if desired to
give each channel an easily remembered
and/or location-specific name.
Maximum of: 5 characters
Only enable the channels which actually
have cameras connected. Please note that
the system will show a videoloss message on
channels which are enabled, but do not have
a connected camera (i.e., no incoming video
stream).
As all channels are IP enabled, there are two
choices for resolution.
720P
§
1080P
§
DEFAULT SETTINGS:
43 of 149