Nine Camera On-Screen View - Gatekeeper Y724 User's Operating Manual

Y724 User Operating Manual
3.4.3 – Nine Camera On-Screen View
In 9 Camera On-screen View mode, the screen is split into nine sections (using a 3x3 grid layout)
and video from nine cameras is simultaneously shown on the screen.
In order to select a specific camera for viewing, you may press any of the keys [1-9] on the
§
IR Remote Control or the ICD2 to immediately jump to that channel and display the
video stream from the corresponding camera. This will switch the display to Single
Camera On-screen View to display the video from the selected camera.
- To jump to channels 10 and above, you can press the two keys which represent
the channel number, in quick succession (e.g. to jump to channel 12, press the key
[1] followed by the key [2] immediately).
Alternatively, with the Finger Mouse or the ICD2, you could also click on any video
§
stream on the (3x3) grid display to immediately jump to that channel and display the
video from the corresponding camera. This will switch the display to Single Camera On-
screen View to display the video from the selected camera.
You can cycle through the available channels iteratively in (3x3) grid display mode by
§
pressing the key zero [0] on the IR Remote Control or the ICD2.
Cycling through the
Cameras in 9 Camera
On-Screen View Mode
23 of 149