Y724 Startup Screen Layout - Gatekeeper Y724 User's Operating Manual

Y724 User Operating Manual
No. Action
11 Cycle to the next
channel.
Playback controls for
12
video.
3.6 – Y724 Startup Screen Layout
Upon start up, the screen of the Y724 will display live video streams from the cameras attached to
the DVR. Users can select and configure how many video channels to be displayed on the screen
for monitoring purposes.
The screen also serves as an interface into the menu system of the DVR where users can playback
recorded video and access the configuration menu to change the device configuration settings.
IR Remote
corresponding channel
number.
Press the (0) button on
the numeric keys of the
IR Remote.
When you are viewing
video playback, press
the Setup key to
display/hide the on-
screen video playback
controls which you then
use to adjust the video
playback.
Besides that, you may
also use the following
dedicated keys on the IR
Remote to perform the
following actions:
Pause/Step through the
video frame by frame.
Play the video at normal
speed.
Slow motion playback
(pressing repeatedly
cycles through the
available slow-motion
speed settings).
Stop the video playback.
Finger Mouse
Not applicable. Use the
on-screen controls.
When you are viewing
video playback, press the
Right Button to
display/hide the on-screen
video playback controls.
You may then use the on-
screen controls to adjust
the video playback.
ICD2
the screen to switch to the
corresponding channel.
Press the (0) button on
the numeric keypad of the
ICD2.
When you are viewing
video playback, tap
anywhere on the screen
to display/hide the on-
screen video playback
controls.
You may then use the on-
screen controls to adjust
the video playback.
27 of 149