Double Camera On-Screen View - Gatekeeper Y724 User's Operating Manual

Y724 User Operating Manual
You can also cycle through the channels iteratively by pressing the key zero [0] on the IR
§
Remote Control or the ICD2.
Cycling through the Video
Channels in Single View

3.4.2 - Double Camera On-Screen View

In Double Camera On-screen View mode, the screen is split into two sections (using a split video
frame layout) and video from two cameras are shown simultaneously on the screen.
In order to select a specific camera for viewing, you may press any of the keys [1-9] on the
§
IR Remote Control or the ICD2 to immediately jump to that channel and display the
video stream from the corresponding camera. This will switch the display to Single
Camera On-screen View to display the video from the selected camera.
- To jump to channels 10 and above, you can press the two keys which represent
the channel number, in quick succession (e.g. to jump to channel 12, press the key
[1] followed by the key [2] immediately).
Alternatively, with the Finger Mouse or the ICD2, you could also click on any video
§
stream on the split screen video display to immediately jump to that channel and display
the video from the corresponding camera. This will switch the display to Single Camera
On-screen View to display the video from the selected camera.
You can cycle through the available channels iteratively (in split screen video display
§
mode) by pressing the key zero [0] on the IR Remote Control or the ICD2.
Cycling through the Cameras in
Double Camera On-Screen View
Mode
22 of 149