Table of Contents
Advertisement
G4-504HD2a User Guide
6.6.3 Advanced
This subsection enables you to set up the trigger for alarm events based on G-Sensor input, and also to
define the actions that will be taken when the alarm occurs.
G Sensor
Configuring the G4-504HD2a
Navigate to: Main Menu
G Sensor
Alarm Type
Trigger
Linkage
Setup
→
Checkbox – if selected, enables the device to
monitor for G Sensor trigger events. In case of
G Sensor exceeding the threshold values, this
alarm will be triggered.
DEFAULT SETTINGS:
Checkbox – Unselected
▪
Drop list to select the classification level for the
alarm:
Event
▪
Alarm
▪
DEFAULT SETTINGS:
Alarm
▪
Click the ( Setup ) button under Trigger to
display the Trigger setup screen to setup the
ACC threshold values:
X – numeric text field to set the
▪
threshold value for the G forces along
the x-axis.
Y – numeric text field to set the
▪
threshold value for the G forces along
the y-axis.
Z – numeric text field to set the
▪
threshold value for the G forces along
the z-axis.
DEFAULT SETTINGS:
Disabled.
Click the ( Setup ) button under Linkage to go
to the Linkage setup screen. This sets up the
video display, recording and snapshot options
associated with this alarm.
The Linkage setup screen enables you to
configure the following options:
Alarm
Advanced
→
→
120 of 151
Advertisement
Table of Contents
