Set The Robot Ip Address - OnRobot HANWHA 3FG15 User Manual

Installation

3.4.2 Set the Robot IP address

In the SW Configuration menu choose Network Setting.
If the Compute Box is in its factory default state (all DIP switches are down), choose the DHCP
option and the Compute Box is going to assign an IP address to the robot automatically.
If this would not work, then assign a static IP address to the robot that matches your current IP
settings on your Compute Box (default IP address is 192.168.1.1).
If the default fixed (192.168.1.1) IP address is used on the Compute Box, then enter:
IP address: 192.168.1.2
Subnet Mask: 255.255.255.0
and leave the other fields empty as the next screenshot shows.
NOTE:
Make sure to change the last number in the IP address (if using
255.255.255.0 subnet mask) to avoid an IP conflict with the Compute Box.
27