Command List - Intermec EasyCoder E4 Installation And Operation Manual

Appendix 4 Programming

Command List

Instruction
ALIGN (AN)
BARFONT (BF)
BARFONT (BF) ON/OFF
BARFONTD (BFD)
BARFONTDSIZE (BFSD)
BARFONTDSLANT (BFLD)
BARFONTSIZE (BFS)
BARFONTSLANT (BFL)
BARHEIGHT (BH)
BARMAG (BM)
62
The Intermec Direct Protocol commands are listed below, with a brief
description of their purpose and syntax. For full explanation, refer to
the EasyCoder E4 Direct Protocol, Programmer's Guide.
Purpose and Syntax
Specifi es which part (anchor point) of a text, bar code fi eld, image fi eld,
line, or box will be positioned at the insertion point.
ALIGN|AN <anchor point>
Specifi es a single byte font for printing human readable bar code
interpretation. The settings are: start parameter; font name; font size in
points; character slant in degrees; vertical offset between bar code and
interpretation; width magnifi cation; height magnifi cation; enable/disable
the printing of bar code interpretations.
BARFONT|BF [#<starting parameter number>,]"<fontname>"[,<size>
[,<slant>[,<offset>[,<hmag>[,<vmag>]]]]][ON|OFF]
Enables/disables the printing of bar code interpretations.
BARFONT|BF ON
BARFONT|BF OFF
Specifi es a double byte character set font for printing human readable
bar code interpretation. The settings are: font name; font size in points;
character slant in degrees.
BARFONTD|BFD "<fontname>"[,<size>[,<slant>]]
Specifi es the font size of a double byte character set in points for printing
human readable bar code interpretation.
BARFONTDSIZE|BFSD <size>
Specifi es the slant of a double byte character set font in degrees for
printing human readable bar code interpretation.
BARFONTDSLANT|BFLD <slant>
Specifi es the font size for a single byte character set font in points for
printing human readable bar code interpretation.
BARFONTSIZE|BFS <size>
Specifi es the slant of a single byte character set font in degrees for printing
human readable bar code interpretation.
BARFONTSLANT|BFL <slant>
Specifi es the height of a bar code in dots.
BARHEIGHT|BH <height>
Specifi es the width magnifi cation of the bars in a bar code.
BARMAG|BM <magnifi cation>
Intermec EasyCoder E4 – Installation & Operation Ed. 2