Intermec EasyCoder E4 Installation And Operation Manual page 65

Appendix 4 Programming
Command List, cont.
Instruction
CUT
CUT ON/OFF
DATE$
DATEADD$
DIR
ERROR
FIELDNO
FILE& LOAD
FILES
FONTD (FD)
FONTDSIZE (FSD)
FONTDSLANT (FLD)
64
Purpose and Syntax
Makes the optional paper cutter perform a cutting cycle.
CUT
Enabling/disabling automatic cutting after PRINTFEED.
CUT [<feed length>] ON|OFF
Sets or returns the current date, optionally in the format specifi ed by the
FORMAT DATE$ command.
DATE$ = "<YYMMDD>"
PRINT DATE$[("F")]
Returns a new date after a number of days has been added to, or subtracted
from, the current date or optionally a specifi ed date.
PRINT DATEADD$(["<original date>",]<number of days>[,"F"])
Specifi es the print direction.
DIR <direction>
Defi nes error messages and enables the error handler for specifi ed
error conditions.
ERROR <error number>,"<error message>"
Gets the current fi eld number for partial clearing of the print buffer
by a CLL instruction.
<variable name>%=FIELDNO
Receives and stores binary fi les in the printer's RAM memory.
FILE& LOAD "<fi lename>",<fi le size>
Lists the fi les stored in one of the printer's directories to the standard OUT
channel. RAM: is the default if no other device is specifi ed.
FILES ["ROM:|RAM:|CARD1:|CARD2:|CACHE:"]
Selects a double byte character set font for the printing of subsequent
PRTXT instructions, and optionally sets the font size and slant.
FONTD|FD "<fontname>"[,<size>[,<slant>]]
Sets the size in points of the current double byte character set font.
FONTDSIZE|FSD <size>
Sets the slant in degrees of the current double byte character set font.
FONTDSLANT|FLD <slant>
Intermec EasyCoder E4 – Installation & Operation Ed. 2