Safety Requirements; Product Labeling - Intermec EasyCoder E4 Installation And Operation Manual

Chapter 1 Introduction
Safety
Requirements

Product Labeling

6
Intermec assumes no responsibility regarding the CE Directive if
the printer is handled, modifi ed, or installed in any way other than
that described in Intermec's manuals.
Caution
• Read this manual carefully before connecting the printer.
• Moving parts are exposed when the side door is open, so ensure
that the door is closed before you operate the printer.
• Do not put your fi ngers inside the print mechanism when
the power is on.
• Place the printer on an even surface which can support its weight of
approximately 4.7 kg (10.3 pounds) plus supplies.
• Do not spray the printer with water. If using a hose to clean the
premises in an industrial environment, remove the printer or
protect it carefully from spray and moisture.
• Carefully read the warning text on the envelope before using
a cleaning card.
• Do not transport the printer without fi rst removing any supplies.
The machine label is attached to the bottom of the printer and
contains information on type, model, and serial number as well as
AC voltage. It also contains various signs of approval.
Intermec EasyCoder E4 – Installation & Operation Ed. 2