Installation Unpacking - Intermec EasyCoder E4 Installation And Operation Manual

Installation
Unpacking
Intermec EasyCoder E4 – Installation & Operation Ed. 2
Before you install the printer, examine the package for possible
damage or missing parts:
• Open the box and lift the printer out.
• Check that the printer has not been visibly damaged during
transportation. Keep the packing materials in case you need to
move or reship the printer.
• The label at the bottom of the printer gives the voltage, the
part number, and the serial number. The part number indicates
build options.
• Check that any options you ordered are included.
• Check that all the accessories are included. As standard, the
box contains:
- Intermec EasyCoder E4 printer
- Power cord
- Quality check card
- Cleaning card
- Starter pack of labels
- Starter pack of thermal transfer ribbon
- Set of manuals
- Supporting software and product information on CD
- Parallel interface cable.
• Check that the power cord and the preset voltage are appropriate
for the local standard.
European-type
230 VAC plug
If the printer has been damaged in any way during transportation,
complain to the carrier immediately.
If the delivery is incorrect or any parts are missing, report it
immediately to the distributor.
US/Canadian-type
115 VAC plug
Chapter 2
GB-type
230 VAC plug
7 7