Programming a
Label, cont.
Intermec EasyCoder E4 – Installation & Operation Ed. 2
Then add the variable data and a print instruction:
LAYOUT RUN "LABEL1"
<STX>
ABC
My FIRST label!
<EOT>
PF
To print more than one label, add the number of copies to the PF
(printfeed) command, for example PF 10.
For details on formatting the fi elds, see the EasyCoder E4 Direct
Protocol, Programmer's Guide.
Appendix 4 Programming
(select layout)
(start of input data, ASCII 02 dec)
(variable input data to VAR1$)
(variable input data to VAR2$)
(end of input data, ASCII 04 dec)
(print one label)
61