Intermec EasyCoder E4 Installation And Operation Manual page 14

Media Load – Tear-Off, cont.
7
Lower the printhead.
9
2 x Feed
Print out two blank copies by pressing Feed
twice. If loading media for the fi rst time or
when switching to a new type or brand of
media, instead print a test label as described
at the end of this chapter.
Intermec EasyCoder E4 – Installation & Operation Ed. 2
8
1
Close the covers.
10
To tear off the media, pull it downwards
against the tear bar.
Chapter 3 Operation
2
13