Intermec EasyCoder E4 Installation And Operation Manual page 66

Command List, cont.
Instruction
FONT (FT)
FONTSIZE (FS)
FONTSLANT (FL)
FONTS
FORMAT
FORMAT DATE$
FORMAT INPUT
FORMAT TIME$
FORMFEED (FF)
FRE
FUNCTEST$
Intermec EasyCoder E4 – Installation & Operation Ed. 2
Purpose and Syntax
Selects a single byte character set font for the printing of subsequent
PRTXT instructions, and optionally sets the font size and slant. The default
font is Swiss 721 BT in 12 point size, and slant 0°.
FONT|FT "<fontname>"[,<size>[,<slant>]]
Sets the size in points of the current single byte character set font.
FONTSIZE|FS <size>
Sets the slant in degrees of the current single byte character set font.
FONTSLANT|FL <slant>
Returns the names of all fonts stored in the printer's memory to the
standard OUT channel.
FONTS
Formats the printer's RAM memory, or formats a SRAM-type memory
card to MS-DOS format.
FORMAT "<device>"[,<no of entries>[.<no of bytes>]]
Specifi es the format of the string returned by DATE$("F") and
DATEADD$(...,"F") instructions.
FORMAT DATE$ <string>
Specifi es separators for layout variable data entry.
FORMAT INPUT "<start separator>","<end separator>","<fi eld
separator>"
Specifi es the format of the string returned by TIME$("F") and
TIMEADD$(...,"F") instructions.
FORMAT TIME$ "<string>"
Activates the feed mechanism in order to feed out or pull back a
certain length of media. If the feed length is not specifi ed, the printer
feeds a blank label.
FORMFEED|FF [<feed length in dots>]
Returns the number of free bytes in the RAM memory (1) or the
Flash memory (2.)
FRE(<1>|<2>)
Performs various hardware tests on the ROM, RAM, any cards fi tted,
and on the printhead.
FUNCTEST$("RAM|CARD1|CARD2|HEAD")
Appendix 4 Programming
65