Intermec EasyCoder E4 Installation And Operation Manual page 67

Appendix 4 Programming
Command List, cont.
Instruction
HEAD
IMAGE LOAD
IMAGES
INPUT ON
INPUT OFF
INVIMAGE (II)
KILL
LAYOUT END
LAYOUT INPUT
LAYOUT RUN
LTS& ON/OFF
MAG
66
Purpose and Syntax
Returns the result of a printhead check and sets printhead resistance.
PRINT HEAD(<type of check>)
Receives and stores image fi les in .PCX format either in the fi le system
or in volatile memory.
IMAGE LOAD "<imagename>",<fi lesize>,"<fl ag>"
Returns the names of all images stored in the printer's memory to
the standard OUT channel.
IMAGES
Sets SYSVAR(18) to 0 and enables layouts and use of variable
data fi elds.
INPUT ON
Restores SYSVAR(18) and disables layouts and use of variable
data fi elds.
INPUT OFF
Inverts the printing of text and images from "black-on-white" to
"white-on-black."
INVIMAGE|II
Deletes a fi le from the printer's RAM memory or from a DOS-formatted
memory card. Wildcard support (<"*">.)
KILL "[<device>]<fi lename>"
Stops the recording of a layout description and saves the layout.
LAYOUT END
Starts the recording of a layout description.
LAYOUT INPUT "<layout name>"
Enables a pre-defi ned layout.
LAYOUT RUN "<layout name>"
Enables or disables the label taken sensor.
LTS& ON|OFF
Magnifi es a font, barfont or image up to four times separately in
regard of height and width.
MAG <height mag>,<width mag>
Intermec EasyCoder E4 – Installation & Operation Ed. 2