Intermec EasyCoder E4 Installation And Operation Manual page 64

Command List, cont.
Instruction
BARRATIO (BR)
BARSET
BARTYPE (BT)
BREAK
BREAK ON/OFF
CHR$
CLEANFEED
CLL
COPY
COUNT&
Intermec EasyCoder E4 – Installation & Operation Ed. 2
Purpose and Syntax
Specifi es the width ratio between wide and narrow bars in a bar code.
BARRATIO|BR <ratio>
Specifi es a bar code and sets parameters for complex bar codes.
BARSET [#<start parameter>,)"bar code name",<ratio wide bars>,
<ratio narrow bars>,<mag>,<height>
Specifi es the type of bar code.
BARTYPE|BT "<bar code name>"
Specifi es a break interrupt character separately for either the parallel or
serial communication channel.
BREAK <device>,<break character>
Enables/disables break interrupt separately for either the parallel or
serial communication channel.
BREAK <device> ON|OFF
Returns the ASCII character whose number is given in the brackets.
CHR$(<ASCII character number>)
Runs the printer's feed mechanism for the distance specifi ed in dots.
CLEANFEED <length in dots>
Clears the print image buffer; completely if no starting fi eld is specifi ed, or
optionally from a specifi ed fi eld to the end of the label.
CLL [<variable name>%]
Copies fi les.
COPY "[<source device>]<original fi lename>",
"[destination device>]<new fi lename>"|"uart1:"
Creates a counter. Alpha counters range from A to Z, numeric counters
have no practical limit.
COUNT& "START",< counter number>,"<start value>"
COUNT& "WIDTH",<counter number>,"<number of digits>"
COUNT& "COPY",<counter number>,"<number of copies>"
COUNT& "INC",<counter number>,"<incr. value>|<decr. value>"
COUNT& "STOP",<counter number>,"<stop value>"
COUNT& "RESTART",<counter number>,"<restart value>"
Appendix 4 Programming
63