Intermec EasyCoder E4 Installation And Operation Manual page 17

Chapter 3 Operation
Media Load – Peel-Off, cont.
10
9
2
1
Wind up the liner on to the takeup hub and
secure with the clip. Wind up the liner so that
Route the liner over the tear bar, under the
the media becomes tight.
platen roller, and under the lower guide shaft.
11
12
2 x Feed
1 2
Print out two blank copies by pressing Feed
twice. If loading media for the fi rst time or
when switching to a new type or brand of
media, instead print a test label as described
at the end of this chapter.
Close the covers.
16 Intermec EasyCoder E4 – Installation & Operation Ed. 2