Select Graphics Mode; Reassign Graphics Mode - Intermec 6822P User Manual

Chapter 4 — Control Code Definitions
Graphic Modes
Mode
Single-dDensity
Low Speed Double-Density
*High Speed Double-Density
*Low-Speed Quadruple-Density 3
CRT I
Single–Density Plotter
CRT II
*Double-Density Plotter
*Adjacent dots in a given row cannot be printed in these modes.
72

Select Graphics Mode

Enables the graphics mode represented by the variable m in the Graphic
Modes table. The total number of dot columns to print is represented by
n1 and n2. Any graphic string that exceeds the length of the print line is
discarded.
Format
Decimal
27 42 m n1 n2

Reassign Graphics Mode

Changes graphic modes.
Format
Decimal
27 63 s n
s is one of the K, I, Y, or Z characters and n is one of the 0-7 modes as
shown in Graphic Modes table.
n Dots per Inch / Dots per 8 in Line
0 60 dots per inch, 480 dots per 8 in line
1 120 dots per inch, 960 dots per 8 in line
2 120 dots per inch, 920 dots per 8 in line
240 dots per inch, 1920 dots per 8 in line
4 60 dots per inch, 480 dots per 8 in line
5 72 dots per inch, 576 dots per 8 in line
6 90 dots per inch, 720 dots per 8 in line
7 144 dots per inch, 1152 dots per 8 in line
Hex
1B 2A m n1 n2
Hex
1B 3F s n
6820 Series 80-Column Printer User's Manual
ASCII
ESC "*" m n1 n2
ASCII
ESC "?" s n