Connecting To The Printer; Understanding The Font Modules - Intermec 6822P User Manual

Chapter 3 — Configuring the 6820 Printer

Connecting to the Printer

Disconnect this terminal holder
ribbon cable from the floor of
the printer cavity

Understanding the Font Modules

20
Connect your printer to your desktop computer using a serial cable
(P/N 226-270-xxx). The serial COM port connector on either the fixed
mount printer or portable printer is on your printer mechanism, the same
side as the green thumb wheel and next to the reset switch.
Before connecting to your PC, locate and disconnect the gray terminal
holder ribbon cable connector from the floor of the printer cavity. The
cable is located behind the printer mechanism on the same side as the
green thumb wheel and is the one that is not attached to the printer
mechanism.
For information on using the Printer Configuration Utility see
Intermec provides the following font modules for your 6820:
nft00000.mod — Default International
nft00437.mod — IBM/Microsoft compatible Code Page 437
nft00932.mod — JIS Japanese
nft00936.mod — GB2312 Chinese Simplified
nft00949.mod — KSC5601 Korean
6820 Series 80-Column Printer User's Manual
Ignore this cable attached
to the printer mechanism
page 21.