Table of Contents
Advertisement
Appendix A — Specifications
Portable Printer
Portable Printer Dimensions
Configuration
with handle, 700 Series, or CK60 Holder Top Mount, and
Deep Paper Tray
with handle, 700 Series, or CK60 Holder Top Mount or Fill
Plate, and Shallow Paper Tray
Media Specifications
Material Breakdown
114
The portable printer may come with a handle, an AC foot, or with a
terminal holder top mount.
Using paper that matches the following specifications
ensures optimum 6820 performance. Variation from these
specifications, use of aged paper, or use of paper exposed to
elements such as dirt or humidity may cause printing
problems.
The printer works with 1-3 ply carbonless paper that is single-edge glued
and designed for sprocket feed. Standard paper size is 8.5 x 11 in or 241
x 305 mm international (8.5 x 12 in). Use 3-ply forms up to a maximum
of 0.23 mm (0.009 in) thick.
A soft, flexible, rubber type cement applied to one perforation strip only
is preferred. The paper should wrap around a 1 1/4 in diameter roll
without curl or wrinkle.
The following tables show the material broken down per ply.
14# CBF (Carbonless Back and Front)
Basis Weight
Caliper
Moisture
Width
38.1 cm
(15.0 in)
41.9 cm
(16.5 in)
Target
Under
14 lb
13.3 lb
2.9
2.6
5.0
4.0
6820 Series 80-Column Printer User's Manual
Length
Depth
42.6 cm
20.3 cm (8.0
(16.8 in)
in)
38.1 cm
13.0 cm (5.1
(15.0 in)
in)
Over
14.7 lb
3.2
6.0
Advertisement
Table of Contents
Troubleshooting
