Enable Printing Of Character Graphics - Intermec 6822P User Manual

Printable Code Expansion Characters (continued)
Hex ASCII
05 ENQ
06 ACK
10 DLE
6820 Series 80-Column Printer User's Manual
Hex ASCII
1D GS
1E RS
1F US

Enable Printing of Character Graphics

Enables the printing of character graphics, until disabled with the
Disable Printing of Character Graphics function.
Note: This function is only useful with the default SBCS.
Format
Decimal
27 116 1
For character values from 0 to 31 (00h-1Fh):
•
When the default SBCS code page is selected, the FX-86e IBM
character graphics symbol set is printed.
•
When other SBCS code pages are selected, the codes (00h-1Fh),
listed above in the Printable Code Expansion Characters table are
printed.
For character values from 32 to 126 (20h-7Eh):
•
When the default SBCS code page is selected, the selected
international character set is printed.
• When other SBCS code pages are selected, the international
character set selection is not in effect.
For the character value 127 (7Fh):
•
When the default SBCS code page is selected, a space is printed
•
When other SBCS code pages are selected, the character associated
with the code page is printed.
Chapter 4 — Control Code Definitions
Hex ASCII
85 none
86 none
90 none
Hex
1B 74 01
Hex ASCII
9D none
9E none
9F none
ASCII
ESC "t" (1)
69