Disable Printing Of Codes 128-159; Expand Printable Code Area - Intermec 6822P User Manual

Chapter 4 — Control Code Definitions
Printable Code Expansion Characters
Hex ASCII
00 NUL
01 SOH
02 STX
03 ETX
04 EOT
68

Disable Printing of Codes 128-159

Disables the printing of codes 128-159. By default, these codes are
disabled.
Format
Decimal
27 55

Expand Printable Code Area

This function allows certain ASCII codes (00h to 1Fh) and codes (80h to
9Fh) to print when the variable n is set to the value of 1. This allows the
use of these codes for user-defined characters. If n = 0, the function
returns these two ranges of characters to non-printable control codes. A
user-defined character set must be selected by ESC "%" (1), the Enable
Printing of Codes 128-159 function, before these codes can print. In both
ranges, only the following codes can redefine as printable characters.
Codes not listed, within the range (00h-1Fh), print as standard control
codes. Codes not listed, within the range (80h-9Fh), are converted to a
control code in the range of (00h-1Fh), by subtraction of 80h.
Note: This function is only useful with the default SBCS.
Format
Decimal
27 73 n
Hex ASCII
11 DC1
15 NAK
16 SYN
17 ETB
1C FS
Hex
1B 37
Hex
1B 49 n
Hex ASCII
80 none
81 none
82 none
83 none
84 none
6820 Series 80-Column Printer User's Manual
ASCII
ESC "7"
ASCII
ESC "I" n
Hex ASCII
91 none
95 none
96 none
97 none
9C none