Intermec 6822P User Manual page 109

Diagnostic Information (continued)
Field
Id Length Description
1 24 V voltage error. Voltages greater than 10%
considered errors. A2D error count
2 Form number at last voltage error
2 24 V error count
20 2 Last high and low voltage extremes on 12 V
input over last 50 reports. Extremes stored as
8-bit A2D conversions
2 Voltage extreme stores min/max 12 V A2D
conversions over printer life
1 12 V error. Voltages less than 10.5 V and
greater than 14.5 V are considered errors.
A2D value is recorded
2 Page number at last 12 V error
2 12 V error count
30 2 Temperature, maximum and minimum over
last 50 reports. Set A2D value
2 Temperature, min/max over printer life. Set
A2D value
1 Temperature error. Last A2D conversion
below -10 or above 60
2 Page number at last temperature error
2 Total number of temperature errors
40 2 Total number of head jams
6820 Series 80-Column Printer User's Manual
Chapter 5 — Troubleshooting and Maintaining the 6820
°
C recorded
Stored as
1 byte
2 bytes
2 bytes
2 bytes
2 bytes
1 byte
2 bytes
2 bytes
2 bytes
2 bytes
1 byte
2 bytes
2 bytes
2 bytes binary
Total
Length
11 bytes
11 bytes
11 bytes
95