Select Default Character Set; Enable Printing Of Codes 128-159 - Intermec 6822P User Manual

6820 Series 80-Column Printer User's Manual
Format
Decimal
27 37 1

Select Default Character Set

If the Select User-Defined Set function was previously set, this function
switches back to the default character set.
Note: This function is only useful with the default SBCS.
Format
Decimal
27 37 0

Enable Printing of Codes 128-159

All codes (128-159) are treated as printable characters, rather than
control codes, with this function. This allows the use of these characters
for user-defined characters. A user-defined set must be selected, using
the Select User-Defined Set function, before these characters can print.
Factory default disables printing of these codes.
Note: This function is only useful with the default SBCS.
Format
Decimal
27 54
Chapter 4 — Control Code Definitions
Hex
1B 25 01
Hex
1B 25 00
Hex
1B 36
ASCII
ESC "%" (1)
ASCII
ESC "%" (0)
ASCII
ESC "6"
67