Intermec 6822P User Manual page 156

Appendix C — Cross-Reference Tables
144
Factory Installed Printer Defaults
Function
Subscript/Superscript
Tabs, horizontal
Tabs, vertical
Top of form
Underline
Unidirectional printing
User defined character set
The settings in the previous table are installed in the printer at the
factory. To restore the printer to these defaults, see
Button" on page 5
The default settings listed below can be restored to the printer, as
described in "Using the Printer Configuration Utility" on page
Printer Default Settings
Function
Zero Print option
Auto Feed configuration
Protocol
Parity
Bit Rate
Default Value
Disabled
Set to default tabs (every 8 column)
1 line feed each tab, channel = 0
Set to current line
Disabled
Disabled (bidirectional)
Removed
for instructions.
Default Value
Zeros are printed with a slash
CR (carriage return added at end of line
without line feed)
NPCP (NORAND Portable
Communications Protocol)
N/A (for NPCP)
19.2 K
6820 Series 80-Column Printer User's Manual
"Using the Reset
21.