Loading Paper In The Printer; Positioning The Paper - Intermec 6822P User Manual

Chapter 2 — Installing the 6820 Printer

Loading Paper in the Printer

Positioning the Paper

14
To load paper from the flat paper tray
1 Hold a stack of paper, up to 6 cm (2.5 in) thick, with the original
facing you, and lay the stack flat into the tray.
2 Pull the top form out to load into the printer.
Follow these steps to load the paper into the printer, or paper jams
may occur.
Paper for the 6820 has perforated strips that fit onto the pinfeed holder
pins, guiding the paper into the printer. This paper is sold separately in 1,
2, or 3-ply forms.
To position the paper
1 Open the pinfeed holders outward.
2 Take the top edge of the sheet of paper and position it, original side
facing down, over the pinfeed holder pins.
3 Align the first few holes of the paper evenly on each side.
4 Close the pinfeed holders.
6822 Series 80-Column Printer User's Manual