Switching On The Ipad; Setting Up The Ipad - Otto Bock 743A250 Bionic Pro Instructions For Use Manual

Preparing product for use

4.6 Switching on the iPad

12

4.7 Setting up the iPad

13
DE
The iPad needs to be set up when preparing the product for use for the first time (e.g. select the system language,
set up Apple ID, configure basic settings). The iPad needs to be connected to the supplied router via WLAN for
this purpose. The router must be connected to the Internet. The iPad was configured to automatically connect to
the WLAN of the router at the factory (do not connect to different WLAN!).
More detailed information on setting up the iPad can be found on the following websites, which can also be
accessed via the respective QR codes:
: DE (German) – https://support.apple.com/de-de/guide/ipad/ipad995bb83d/ios
: EN (English) – https://support.apple.com/guide/ipad/turn-on-and-set-up-ipad995bb83d/ios
► Refer to the "Scanning the QR code" (see Page 21) section to use the QR code.
► Follow the instructions on the iPad screen when setting it up.
16
Hello
EN
743A250 Bionic Pro