Use
51
Für eine korrekte Messung bitte ca. 3 Sekunden
in neutraler Standposition bleiben und dann 10 m
geradeaus gehen.
Für eine korrekte Messung bitte ca. 3 Sekunden
in neutraler Standposition bleiben und dann 10 m
geradeaus gehen.
Für eine korrekte Messung bitte ca. 3 Sekunden
in neutraler Standposition bleiben und dann 10 m
geradeaus gehen.
► Tap the "Start measurement" button.
►
: Have the patient stand still for approx. 3 seconds so the starting position of the sensors is recorded and cal
ibrated.
►
: Have the patient walk along the measuring course.
► Tap the "End measurement" button at the end of the measurement.
: Tap the corresponding button depending on the progress of the measurement.
►
→
: "Repeat" if the progress was not satisfactory and the measurement should be repeated.
→
: "Go to result" if the progress was satisfactory and the result should be displayed on the "Drop foot fit
ting assessment" page.
52
Zum Ergebnis
Übersicht
22.12.2018
Fußaufsatz
Ohne Orthese
Keine Gehhilfe
Vorfuß
GoON
Keine Gehhilfe
Rückfuß
Assessment abschließen
► Tap the "New measurement" button on the "Drop foot fitting assessment" page if an additional measure
ment with an orthosis needs to be performed.
► Tap the "Complete assessment" button when you want to complete the drop foot fitting assessment. ("Com
pleting the drop foot fitting assessment" section – see Page 35).
34
1
2
3
1234567.bionicpro.local
Fallfuß Versorgungs-Assessment
Maximilian Musterkunde
Zusatzparameter
Neurologischer Status
Push-
Standphasendauer
Schwungphasendauer
Hyperextension
Gangkonstanz
Verhalten
L
R
L
n. erk.
16,42
32,54
0,99 Sek.
0,97 Sek.
1,53 Sek.
1,52 Sek.
n. erk.
16,42
32,54
0,99 Sek.
0,97 Sek.
1,53 Sek.
1,52 Sek.
Das Gangbild wurde erfolgreich erfasst.
+
Neue Messung
Benutzername eingeben
Wiederholen
100 %
Fallfuß Versorgungs-Assessment
?
R
Sind Sie mit dem Verlauf
der Messung zufrieden?
Zum Ergebnis
Assessment abschließen
+
Neue Messung
743A250 Bionic Pro