Instructions For Use; System Information - Otto Bock 743A250 Bionic Pro Instructions For Use Manual

5.5.6.1 Instructions for use

32
Gebrauchs-
anweisung
Tapping the "Instructions for use" button opens the digital version of the instructions for use (PDF file) in a separ­
ate tab in the Safari browser. The instructions for use are kept up to date when the base station is updated. The
version number and the publication date (example : 01-1911 = version number 01, publication date 1911 ~
November 2019) are found on the last page of the instructions for use so you can check whether the digital version
is newer than the printed version. The instructions for use are displayed in the language set under "Adjust settings"
(see Page 28). The digital version may also be printed out. The icon

5.5.6.2 System information

33
System
Informationen
Version
Serial
Freier Speicher
Lokale IP Addresse
Datum/Zeit
Basis-Station Zurücksetzen
Achtung: Alle Daten inkl. der Patienten- und
Messdaten werden gelöscht.
Tapping the "System information" button displays important system information.
► Only tap the "Reset"
including the patient and measured data will be deleted and cannot be retrieved again. – After tapping
the button, the word "RESET" also has to be entered to confirm that the base station should really be reset.)
The following important information is displayed for all sensors:
: Battery icon displays the charge level.
: Version number of the sensor firmware.
: Button – tapping this button causes the LED of the corresponding sensor to flash in the colour pink for several
seconds.
: Internal number of the sensor.
743A250 Bionic Pro
1234567.bionicpro.local 1234567.bionicpro.local
1234567.bionicpro.local
Systeminformationen
2019.6.24.dev0+git44698e5f
C Sensor P Sensor T Sensor
fffffff
v.18.6.6 v.18.6.6 v.18.6.6
9.9 GB
20311238 20311238 20311238
172.28.1.1
Wed Jun 26 13:05:17 UTC
FL Sensor FR Sensor
v.18.6.6 v.18.6.6
20311238 20311238
Reset
Benutzername eingeben
button when you want to completely reset the base station (Please note! All data
100 % 100 %
Ottobock SE & Co. KGaA
Max-Näder-Straße 15 · 37115 Duderstadt · Germany
T +49 5527 848-0 · F +49 5527 848-3360
healthcare@ottobock.de · www.ottobock.com
100 %
Basis-Station Zurücksetzen
Achtung: Alle Daten inkl. der Patienten- und
Messdaten werden gelöscht.
can be used to close the tab.
Reset
Use
P Sensor
v.18.6.6
20311238
27