5.3.6 Scanning QR codes
The "Camera" app automatically detects QR codes. The following subsections show how this function can be used
in conjunction with the product if necessary.
5.3.6.1 Scanning the WLAN QR code
21
The iPad is set up for the preconfigured WLAN of the supplied router at the factory. If this connection has been
unintentionally deleted, the connection can be re-established with the WLAN QR code on the bottom of the router
as follows:
►
: Start the "Camera" app.
: Position the camera so the WLAN QR code is in the viewfinder .
►
►
: Tap the "WLAN QR code – connect with '1234567.bionicpro' network" button to establish the WLAN con
nection.
5.3.6.2 Scanning the website QR code
22
The iPad is set up for the user interface homepage at the factory. If the link on the home screen has been uninten
tionally deleted, this link can be opened in the Safari browser with the website QR code on the bottom of the router
as follows:
: Start the "Camera" app.
►
►
: Position the camera so the website QR code is in the viewfinder .
►
: Tap the "Website QR code – open '1234567.bionicpro.local' in Safari" button to open the link in the Safari
browser.
743A250 Bionic Pro
WLAN-QR-CODE
Mit Netzwerk „1234567.bionicpro" verbinden
VIDEO
FOTO
QUADRAT
WEBSITE-QR-CODE
„1234567.bionicpro.local" in Safari öffnen
VIDEO
FOTO
QUADRAT
WLAN-QR-CODE
Mit Netzwerk „1234567.bionicpro" verbinden
WEBSITE-QR-CODE
„1234567.bionicpro.local" in Safari öffnen
Use
21