Cleaning; Disposal - Otto Bock 743A250 Bionic Pro Instructions For Use Manual

Hide thumbs Also See for 743A250 Bionic Pro:
Table of Contents

Advertisement

6 Cleaning

CAUTION
Improper cleaning
Skin irritation, formation of eczema or infections due to contamination with germs
► Clean the product regularly.
General cleaning instructions
► Unplug all cables and switch off the device for cleaning.
► Use a soft, slightly damp lint-free cloth. Make sure that no moisture gets into the openings during cleaning. Dry
the product with a soft cloth. Allow to air dry in order to remove residual moisture.
► Do not use any window or household cleaners, compressed air, sprays, solvents, ammonia solutions, abrasive
cleaners or cleaners with hydrogen peroxide during cleaning.
► Wipe the screen with a soft, lint-free cloth to remove fingerprints.
Washing the sensor holders and extension straps
► Remove the sensors prior to washing.
► Wash the sensor holders and extension straps on a regular basis (hand wash with mild detergent/do not
iron/do not bleach/do not tumble dry/do not dry clean).
Disinfecting the sensor holders and extension straps
Required materials: colourless, alcohol-free disinfectant (verify material compatibility!), soft cloth
>
1) Disinfect the product with the disinfectant.
2) Dry the product with a cloth.
3) Allow to air dry in order to remove residual moisture.

7 Disposal

INFORMATION
This product may not be disposed of with regular domestic waste in all jurisdictions. Disposal that is not in
accordance with the regulations of the country where the product is used may have a detrimental impact on health
and the environment. Please observe the information provided by the responsible authorities in the country of use
regarding return, collection and disposal procedures.
743A250 Bionic Pro
Cleaning
45

Advertisement

Table of Contents
loading

Table of Contents