Daily Inspections (Dynamic); Yearly Inspection - WBM KOMATSU GD655-6 Manual

MSW102 SNOW WING
PARTS, SERVICE AND INSTALLATION
MAINTENANCE
DAILY INSPECTIONS (DYNAMIC), YEARLY INSPECTION

Daily Inspections (Dynamic)

When performing inspections with equipment in a fully operable condition ensure all personnel/
objects are at the recommended O.E.M (Original Equipment Manufacturer) safe working distance
from the operating area of the machine. Conduct all inspections on flat, dry surfaces where the
equipment and all attachments are correctly supported. Failure to do so may result in property
damage, serious injury or death.
Carry out the following functional checks:
1. Lift-frame: fully raise and lower the lift-frame. Movement should be smooth.
2. Pushpole: fully extend and retract the pushpole. Movement should be smooth.
3. Lift Moldboard: fully raise and lower moldboard. Movement should be smooth.
If the attachment is not functioning correctly have it checked and/or repaired by a qualified
service technician before attempting to use the attachment. Failure to comply may result in
property damage, serious injury or death.

Yearly Inspection

Attachments must be inspected at least once a year using NDT (Non-Destructive
Testing). Use NDT (Non-Destructive Testing) for welds and structure. Visually inspect all
other components.
Weldco-Beales Manufacturing
! WARNING
! WARNING
WBM
Page 43