Electrical Installation - WBM KOMATSU GD655-6 Manual

MSW102 SNOW WING
PARTS, SERVICE AND INSTALLATION
ASSEMBLY AND INSTALLATION

ELECTRICAL INSTALLATION

Electrical Installation
The snow wing functions are controlled from the snow wing control panel, mounted in
the cab.
Mount the control panel as an extension of the existing joystick console. See photo
below.
The controls on the snow wing control panel send the electrical control signals to the
snow wing electrical box, which controls the WBM hydraulic valve.
Mount the electrical box behind the operator's seat.
There are three wiring harnesses from the electrical box, one to the WBM hydraulic
valve, one to the snow wing control panel and one to supply power to the box.
ELECTRICAL BOX BEHIND
OPERATOR'S SEAT
Weldco-Beales Manufacturing
ELECTRICAL POWER SUPPLY
BOX TO FACTORY
OPTIONAL WORK
EQUIPMENT, R4
WIRING HARNESS
TO SNOW WING
CONTROL PANEL
SNOW WING
CONTROL PANEL,
MOUNTED IN CAB
WBM
WIRING HARNESS
HYDRAULIC
FROM ELECTRICAL
VALVE
BOX TO WBM
VALVE
WBM
Page 31